3D打印技术在眶底缺损修复重建中的应用

doi:10.19438/j.cjoms.2017.06.007

中国口腔颌面外科杂志 ›› 2017, Vol. 15 ›› Issue (6): 515-518.doi: 10.19438/j.cjoms.2017.06.007

3D打印技术在眶底缺损修复重建中的应用

孙少龙¹, 来庆国², 唐晓朋², 慈江波², 李艳², 薛润琪², 张志超²

1. 山东大学口腔医学院,山东济南 250012;
2.山东大学第二医院,口腔颌面外科,山东济南 250033

收稿日期:2017-05-12 修回日期:2017-08-21 出版日期:2017-11-20 发布日期:2017-12-21
通讯作者: 来庆国,E-mail: laiqingguo@sdu.edu.cn
作者简介:孙少龙（1983-）,男,在读硕士研究生,E-mail: 673311464@qq.com
基金资助:
山东省科技发展计划(2014GSF118145); 山东省重点研发计划（2017GSF218097）; 山东省优秀中青年科学家科研奖励基金(BS2013YY050); 济南市高校院所自主创新计划(26010205081417); 山东大学基本科研业务费专项资金资助（2017JC046）

Application of 3D printing technology for improved reconstruction in orbital floor defect

SUN Shao-long¹, LAI Qing-guo², TANG Xiao-peng², CI Jiang-bo², LI Yan², XUE Run-qi¹, ZHANG Zhi-chao

1.School of Stomatology,Shandong University. Jinan 250012;
2.Department of Oral and Maxillofacial Surgery, Second Hospital of Shandong University. Jinan 250033, Shandong Province, China

Received:2017-05-12 Revised:2017-08-21 Online:2017-11-20 Published:2017-12-21

摘要/Abstract

摘要： 目的探讨3D打印技术和镜像求反在口腔颌面部创伤和肿瘤导致的眶底缺损修复重建中的应用价值。方法选择眶底缺损患者7例,以DICOM格式文件保存所有患者的上颌骨CT扫描数据,转换为STL格式后,打印疾病模型和镜像模型。钛网和可吸收眶底板依托镜像模型进行精确塑形,手术中将预成型的钛网或可吸收眶底板植入眶底缺损部位,修复缺损。结果 7例患者均按术前设计和钛网预成型,术中实现了眶底缺损的精准修复、重建。术后患者眼球内陷、复视和眼球突出等症状消失,面部对称性恢复良好。结论 3D打印技术可以实现术前设计、手术模拟和植入物精确塑形,有效提高眶底缺损修复重建的精确性和安全性。

关键词: 3D打印, 眶底缺损, 修复重建, 精准外科

Abstract: PURPOSE: The aim of this study was to evaluate the validity of 3D printing technology for improved reconstruction in orbital floor defect. METHODS: Individual 3D disease models and mirror-imaged 3D reconstruction models were printed on the basis of the CT data. Preoperative planning by rehearsing surgical procedures was made on the 3D disease models and the scaffolds including titanium and absorbable meshes or plates were anatomically pre-molded using the mirror-imaged 3D models as guide. RESULTS: Precise reconstruction was achieved on all patients with improved cosmetic outcomes of craniomaxillofacial shapes. There were no diplopia, infection, foreign body reaction, exophthalmos, enophthalmos after surgery. CONCLUSIONS: Orbital floor reconstruction can be optimized and successful through preoperative planning and pre-molded scaffolds with 3D printing bone model by computer-aid design and manufacturing.

Key words: 3D printing, Orbital floor defect, Repair and reconstruction, Precise surgery

中图分类号:

R782.2

孙少龙, 来庆国, 唐晓朋, 慈江波, 李艳, 薛润琪, 张志超. 3D打印技术在眶底缺损修复重建中的应用[J]. 中国口腔颌面外科杂志, 2017, 15(6): 515-518.

SUN Shao-long, LAI Qing-guo, TANG Xiao-peng, CI Jiang-bo, LI Yan, XUE Run-qi, ZHANG Zhi-chao. Application of 3D printing technology for improved reconstruction in orbital floor defect[J]. China J Oral Maxillofac Surg, 2017, 15(6): 515-518.

参考文献

[1] Grob S, Yonkers M, Tao J. Orbital fracture repair [J]. Semin Plast Surg, 2017, 31(1): 31-39.
[2] Gart MS, Gosain AK. Evidence-based medicine: Orbital floor fractures [J]. Plast Reconstr Surg, 2014, 134(6): 1345-1355.
[3] Boyette JR, Pemberton JD, Bonilla-Velez J. Management of orbital fractures: challenges and solutions [J]. Clin Ophthalmol, 2015, 9: 2127-2137.
[4] Sun MT, Wu W, Watanabe A, et al. Orbital blowout fracture location in Japanese and Chinese patients [J]. Jpn J Ophthalmol, 2015, 59(1): 65-69.
[5] Reich W, Seidel D, Bredehorn-Mayr T, et al. [Reconstruction of isolated orbital floor fractures with a prefabricated titanium mesh] [J]. Klin Monbl Augenheilkd, 2014, 231(3): 246-255.
[6] Aldekhayel S, Aljaaly H, Fouda-Neel O, et al. Evolving trends in the management of orbital floor fractures[J]. J Craniofac Surg, 2014, 25(1): 258-261.
[7] Lin J, German M, Wong B. Use of copolymer polylactic and polyglycolic acid resorbable plates in repair of orbital floor fractures [J]. Facial Plast Surg, 2014, 30(5): 581-586.
[8] Singare S, Dichen L, Bingheng L, et al. Design and fabrication of custom mandible titanium tray based on rapid prototyping [J]. Med Eng Phys, 2004, 26(8): 671-676.
[9] Cohen A, Laviv A, Berman P, et al. Mandibular reconstruction using stereolithographic 3-dimensional printing modeling technology [J]. Oral Surg Oral Med Oral Pathol Oral Radiol Endod, 2009, 108(5): 661-666.
[10] Li Y, Jiang Y, Ye B, et al. Treatment of dentofacial deformities secondary to osteochondroma of the mandibular condyle using virtual surgical planning and 3-dimensional printed surgical templates [J]. J Oral Maxillofac Surg, 2016, 74(2): 349-368.
[11] Azuma M, Yanagawa T, Ishibashi-Kanno N, et al. Mandibular reconstruction using plates prebent to fit rapid prototyping 3-dimensional printing models ameliorates contour deformity [J]. Head Face Med, 2014, 10: 45.
[12] von Rundstedt FC, Scovell JM, Agrawal S, et al. Utility of patient-specific silicone renal models for planning and rehearsal of complex tumour resections prior to robot-assisted laparoscopic partial nephrectomy [J]. BJU Int, 2017, 119(4): 598-604.
[13] Punja KG, Kikkawa DO, Morrison VL, et al. Reconstruction of complex orbitocranial deformities using bioresorbable mesh, sterilized orbital models, and in situ contouring [J]. Ophthal Plast Reconstr Surg, 2006, 22(1): 20-24.
[14] Antony AK, Chen WF, Kolokythas A, et al. Use of virtual surgery and stereolithography-guided osteotomy for mandibular reconstruction with the free fibula [J]. Plast Reconstr Surg, 2011, 128(5): 1080-1084.
[15] Prisman E, Haerle SK, Irish JC, et al. Value of preoperative mandibular plating in reconstruction of the mandible [J]. Head Neck, 2014, 36(6): 828-833.
[16] Ishida Y, Takahashi Y, Kitaguchi Y, et al. Orbital floor thickness in adult patients with isolated orbital floor fracture lateral to the infraorbital nerve [J]. J Craniofac Surg, 2016, 27(7): e638-e640.
[17] Joos ZP, Patel B. Reversible blindness following orbital fracture repair [J]. Ophthal Plast Reconstr Surg, 2017, 33(3S Suppl 1): S180-S183.
[18] Herford AS, Miller M, Lauritano F, et al. The use of virtual surgical planning and navigation in the treatment of orbital trauma [J]. Chin J Traumatol, 2017, 20(1): 9-13.
[19] Ogino A, Onishi K, Yamada T. Navigation-assisted bone grafting for blowout fracture [J]. J Craniofac Surg, 2016, 27(2): 328-330.
[20] Essig H, Dressel L, Rana M, et al. Precision of posttraumatic primary orbital reconstruction using individually bent titanium mesh with and without navigation: a retrospective study [J]. Head Face Med, 2013, 9: 18.
[21] Jacobs CA, Lin AY. A new classification of three-dimensional printing technologies: systematic review of three-dimensional printing for patient-specific craniomaxillofacial surgery [J]. Plast Reconstr Surg, 2017, 139(5): 1211-1220.

3D打印技术在眶底缺损修复重建中的应用

Application of 3D printing technology for improved reconstruction in orbital floor defect

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	胡潇丹, 徐豪越, 李晓, 卜令学, 贾暮云, 袁荣涛, 庞宝兴. 超声刀在辅助制备游离腓骨肌皮瓣中的临床应用[J]. 中国口腔颌面外科杂志, 2023, 21(2): 152-157.
[2]	樊文慧, 劳峥, 石慧烽, 毕帆, 涂文勇, 胡海生. 3D打印可分离式口腔支架在口腔癌放疗中的摆位准确性研究[J]. 中国口腔颌面外科杂志, 2022, 20(5): 466-470.
[3]	罗彬, 周美云, 田绣云, 陈鑫如, 韩瑞, 徐锦程. 数字化及3D打印联合内镜辅助技术治疗12例颧骨颧弓骨折效果评价[J]. 中国口腔颌面外科杂志, 2022, 20(2): 188-192.
[4]	张秀秀, 孙健, 李亚莉, 刘延山, 陈立强, 许尧祥, 徐泽先, 孟坤, 孙鸣, 周东阳, 徐典, 高小涵, 程立地. 数字化载葡萄糖酸氯己定PLA/nHA复合支架的制备及性能分析[J]. 中国口腔颌面外科杂志, 2022, 20(1): 15-21.
[5]	史伟红, 刘严, 阿曼妮萨罕·加帕尔, 阿依达娜·乌拉尔别克, 贺琦, 凌彬. 3D打印定位导板在辅助制备股前外侧穿支皮瓣中的临床应用[J]. 中国口腔颌面外科杂志, 2022, 20(1): 52-57.
[6]	杨勇, 丁明超, 杨涛, 刘义闻, 陆金标, 田磊. 基于3D打印水凝胶技术的显微外科仿真训练教具的研制与应用效果评价[J]. 中国口腔颌面外科杂志, 2021, 19(6): 557-561.
[7]	陈传俊, 陈伟良, 孙长伏, 何悦, 蒋灿华, 彭歆, 尚政军, 韩正学, 李劲松, 侯劲松, 林李嵩, 韩新光, 魏建华, 王志勇, 吴煜农, 郑家伟, 李龙江, 王慧明, 李祖兵, 郭传瑸, 杨驰, 石冰, 张志愿. 颏下岛状瓣修复口腔颌面部缺损专家共识[J]. 中国口腔颌面外科杂志, 2021, 19(5): 385-391.
[8]	马春跃, 朱云, 郭兵, 王良, 沈毅. 头颈部缺损重建术后持续性口底瘘或口咽瘘的救治性治疗[J]. 中国口腔颌面外科杂志, 2021, 19(4): 362-367.
[9]	杜福江, 何水明, 朱鹏娜. 个体化3D打印头颅模型辅助三维预成型钛网在6例复杂上颌骨骨折治疗中的应用[J]. 中国口腔颌面外科杂志, 2021, 19(4): 368-371.
[10]	吕继连, 赵媛, 蔡晓清, 张瑞. MR及3D打印在陈旧性颧眶复合体骨折手术中的应用[J]. 中国口腔颌面外科杂志, 2020, 18(6): 512-515.
[11]	何悦, 蒋灿华, 侯劲松, 王慧明, 彭歆, 刘冰, 李劲松, 郑磊, 徐中飞, 吴煜农, 胡镜宙, 秦兴军, 艾松涛, 周辉红, 李春洁, 张世周, 王军, 李晓光, 刘忠龙, 祝奉硕. 穿支皮瓣修复口腔颌面-头颈部缺损专家共识[J]. 中国口腔颌面外科杂志, 2020, 18(5): 385-389.
[12]	王文雪, 姜帅, 梅东梅, 李晓静, 姚晨阳, 王大山, 赵保东. 3D打印导板在上前牙种植中的精度评价[J]. 中国口腔颌面外科杂志, 2020, 18(2): 127-131.
[13]	江灿洋, 施斌, 黄建平, 江燕, 朱小峰, 黄立, 林李嵩. 游离血管化复合组织瓣在口腔颌面部严重创伤性缺损畸形整复中的应用：11例临床分析[J]. 中国口腔颌面外科杂志, 2020, 18(2): 155-159.
[14]	刘建华, 张志愿, 石冰, 郭传瑸, 孙坚, 王慧明, 孙长伏, 郑谦. 唇缺损局部组织瓣修复重建专家共识[J]. 中国口腔颌面外科杂志, 2019, 17(5): 391-396.
[15]	黄立, 李璐, 江灿洋, 黄建平, 江燕, 廖云阳, 林李嵩. 3D打印的数字化病例数据库在口腔颌面外科骨性疾病教学中的应用[J]. 中国口腔颌面外科杂志, 2018, 16(4): 371-375.