三维打印含铜钛合金对骨髓间充质干细胞成骨分化的影响

doi:10.19438/j.cjoms.2022.04.004

中国口腔颌面外科杂志 ›› 2022, Vol. 20 ›› Issue (4): 334-339.doi: 10.19438/j.cjoms.2022.04.004

三维打印含铜钛合金对骨髓间充质干细胞成骨分化的影响

蒋胜杰^*, 梅鹏^*, 周皓楠, 潘兆澄, 高源, 蔡鸣

上海交通大学医学院附属第九人民医院口腔颅颌面科,上海交通大学口腔医学院,国家口腔医学中心, 国家口腔疾病临床医学研究中心,上海市口腔医学重点实验室,上海 200011

收稿日期:2022-03-03 修回日期:2022-04-17 出版日期:2022-07-20 发布日期:2022-07-20
通讯作者: 蔡鸣,E-mail: zidanecm500@126.com
作者简介:蒋胜杰（1995-）,男,硕士研究生,E-mail: jsj960419@163.com;梅鹏（1996-）,男,硕士研究生,E-mail: meip1217@163.com。^*并列第一作者
基金资助:
上海市自然科学基金（20ZR1431000）

Cu-bearing titanium alloy based on three-dimensional printing promoted osteogenic differentiation of bone marrow mesenchymal stem cells

JIANG Sheng-jie, MEI Peng, ZHOU Hao-nan, PAN Zhao-cheng, GAO Yuan, CAI Ming

Department of Oral and Craniomaxillofacial Surgery, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine; College of Stomatology, Shanghai Jiao Tong University; National Center for Stomatology; National Clinical Research Center for Oral Diseases; Shanghai Key Laboratory of Stomatology. Shanghai 200011, China

Received:2022-03-03 Revised:2022-04-17 Online:2022-07-20 Published:2022-07-20

摘要/Abstract

摘要： 目的: 探讨三维打印含铜钛合金的体外生物相容性和对骨髓间充质干细胞（bone marrow mesenchymal stem cells,BMSCs）成骨分化的影响。方法: 以Ti-6Al-4V-5Cu合金粉末为原料,通过选择性激光熔化（selective laser melting, SLM）技术制备三维打印含铜钛合金（3D Ti-5Cu）;将BMSCs与3D Ti-5Cu合金共同培养,观察其对细胞活性、黏附、增殖、碱性磷酸酶（ALP）活性及成骨分化相关基因表达的影响,以医用钛合金（Ti-6Al-4V）作为对照组。采用 GraphPad Prism 9.3.1软件包对数据进行统计学分析。结果: 成功制备3D Ti-5Cu合金,该新型合金无细胞毒性,与对照组相比无统计学差异（P>0.05）。3D Ti-5Cu合金能促进BMSCs的早期黏附、增殖,并显著提高ALP活性和Runx2、Alp、Bmp2、Opn及Col1a1等成骨分化基因的表达水平（P<0.05）。结论: 3D Ti-5Cu合金具备出色的生物相容性,能促进BMSCs的成骨分化,有利于改善钛合金的生物惰性,为实现钛合金的生物功能化提供了理论依据。

关键词: 三维打印, 含铜钛合金, 骨髓间充质干细胞, 成骨分化

Abstract: PURPOSE: To explore the biocompatibility and the properties to enhance osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) by Cu-bearing titanium alloy based on three-dimensional printing. METHODS: Cu-bearing titanium alloy based on three-dimensional printing(3D Ti-5Cu) was fabricated using Ti-6Al-4V-5Cu alloy powders as raw material via selective laser melting(SLM) technology. The 3D Ti-5Cu alloy was co-cultured with BMSCs to observe its effect on cell activity, adhesion, proliferation, alkaline phosphatase(ALP) activity and gene expression related to osteogenic differentiation, medical titanium alloy (Ti-6Al-4V) was set as the control group. The data were analyzed with GraphPad Prism 9.3.1 software. RESULTS: 3D Ti-5Cu alloy with good cytocompatibility was successfully fabricated in this study, and no statistical difference was found compared with the control group(P>0.05). Meanwhile, 3D Ti-5Cu alloy could enhance adhesion and proliferation of BMSCs, and significantly increased ALP activity and the expression levels of osteogenic differentiation genes such as Runx2, Alp, Bmp2, Opn and Col1a1, and significant differences were found between the groups(P<0.05). CONCLUSIONS: 3D Ti-5Cu alloy possesses excellent biocompatibility and can further promote the osteogenic differentiation of BMSCs, which is beneficial to improve the biological inertia of titanium alloys, and provides a theoretical basis for the realization of biological functionalization of titanium alloys.

Key words: Three-dimensional printing, Cu-bearing titanium alloy, Bone marrow mesenchymal stem cells, Osteogenic differentiation

中图分类号:

R782

蒋胜杰, 梅鹏, 周皓楠, 潘兆澄, 高源, 蔡鸣. 三维打印含铜钛合金对骨髓间充质干细胞成骨分化的影响[J]. 中国口腔颌面外科杂志, 2022, 20(4): 334-339.

JIANG Sheng-jie, MEI Peng, ZHOU Hao-nan, PAN Zhao-cheng, GAO Yuan, CAI Ming. Cu-bearing titanium alloy based on three-dimensional printing promoted osteogenic differentiation of bone marrow mesenchymal stem cells[J]. China J Oral Maxillofac Surg, 2022, 20(4): 334-339.

参考文献

[1] Wang C, Hu H, Li Z, et al.Enhanced osseointegration of titanium alloy implants with laser microgrooved surfaces and graphene oxide coating[J]. ACS Appl Mater Interfaces, 2019, 11(43): 39470-39483.
[2] Wang P, Yuan Y, Xu K, et al.Biological applications of copper-containing materials[J]. Bioact Mater, 2021, 6(4): 916-927.
[3] Huang Q, Ouyang Z, Tan Y, et al.Activating macrophages for enhanced osteogenic and bactericidal performance by Cu ion release from micro/nano-topographical coating on a titanium substrate[J]. Acta Biomater, 2019, 100: 415-426.
[4] Zhuang Y, Zhang S, Yang K, et al.Antibacterial activity of copper-bearing 316L stainless steel for the prevention of implant-related infection[J]. J Biomed Mater Res B Appl Biomater, 2020, 108(2): 484-495.
[5] Ewald A, Käppel C, Vorndran E, et al.The effect of Cu(II)-loaded brushite scaffolds on growth and activity of osteoblastic cells[J]. J Biomed Mater Res A, 2012, 100(9): 2392-2400.
[6] Liu R, Ma Z, Kunle Kolawole S, et al.In vitro study on cytocompatibility and osteogenesis ability of Ti-Cu alloy[J]. J Mater Sci Mater Med, 2019, 30(7): 75-83.
[7] 张臣科, 卢衍锦, 郭宇鹏, 等. 3D打印Ti6Al4V-4Cu合金通过骨免疫调节促进成骨基因的表达[J]. 中国修复重建外科杂志, 2020, 34(9): 1170-1176.
Zhang CK, Lu YJ, Guo YP, et al.Three-dimensional printed Ti6Al4V-4Cu alloy promotes osteogenic gene expression through bone immune regulation[J]. Chinese Journal of Reparative and Reconstructive Surgery, 2020, 34(9): 1170-1176.
[8] Friedenstein AJ.Precursor cells of mechanocytes[J]. Int Rev Cytol, 1976, 47: 327-359.
[9] Wang Y, Zhang W, Yao Q.Copper-based biomaterials for bone and cartilage tissue engineering[J]. J Oorthop Translat, 2021, 29: 60-71.
[10] Bartsch I, Willbold E, Yarmolenko S, et al.In vivo fluorescence imaging of apoptosis during foreign body response[J]. Biomaterials, 2012, 33(29): 6926-6932.
[11] Huo SC, Yue B.Approaches to promoting bone marrow mesenchymal stem cell osteogenesis on orthopedic implant surface[J]. World J Stem Cells, 2020, 12(7): 545-561.
[12] 李改明, 刘思雨, 战德松, 等. 3D打印医用钛合金的抗菌性能和体外生物相容性[J]. 材料研究学报, 2019, 33(2): 117-123.
Li GM, Liu SY, Zhan DS, et al.Antibacterial properties and biocompatibility of SLM-fabricated medical titanium alloys[J]. Chinese Journal of Materials Research, 2019, 33(2): 117-123.
[13] 马凯, 王敏雅, 李悦, 等. 不同质量分数的钛-铜合金对MC3T3-E1细胞分化的影响研究[J]. 中国实用口腔科杂志, 2018, 11(6): 354-357.
Ma K, Wang MY, Li Y, et al.Effect of different concentration of titanium-copper alloys on the differentiation of MC3T3-E1 cells[J]. Chinese Journal of Practical Stomatology, 2018, 11(6): 354-357.
[14] Zhang X, Li H, Lin C, et al.Synergetic topography and chemistry cues guiding osteogenic differentiation in bone marrow stromal cells through ERK1/2 and p38 MAPK signaling pathway[J]. Biomat Sci, 2018, 6(2): 418-430.
[15] Liu J, Zhang X, Wang H, et al.The antibacterial properties and biocompatibility of a Ti-Cu sintered alloy for biomedical application[J]. Biomed Mater, 2014, 9(2): 025013.
[16] Wang T, Wan Y, Liu Z.Fabrication of hierarchical micro/nanotopography on bio-titanium alloy surface for cytocompatibility improvement[J]. J Mater Sci, 2016, 51(21): 9551-9561.

三维打印含铜钛合金对骨髓间充质干细胞成骨分化的影响

Cu-bearing titanium alloy based on three-dimensional printing promoted osteogenic differentiation of bone marrow mesenchymal stem cells

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 13

编辑推荐

Metrics

本文评价

[1]	谢昕儒, 冉雪会, 徐伟峰, 刘秀明, 张翔凯, 曹玲燕, 张善勇. 小分子鹰嘴豆芽素A对人牙髓干细胞成骨分化的影响[J]. 中国口腔颌面外科杂志, 2021, 19(3): 205-212.
[2]	王毅炜, 李晨琳, 蒋倩, 徐光宙. 不同浓度牡蛎蛋白肽对大鼠骨髓间充质干细胞增殖和分化能力的影响[J]. 中国口腔颌面外科杂志, 2021, 19(1): 6-11.
[3]	支音, 郁爽, 沈洪洲, 司家文, 袁媛, 史俊, 刘昌胜. PEGS/β-TCP屏障膜在促进大鼠颅骨缺损骨组织再生中的作用[J]. 中国口腔颌面外科杂志, 2020, 18(3): 219-225.
[4]	魏弘朴，应王君子，余婧爽，姜腾飞，李祥，王旭东. 三维打印钛合金颅颌面接骨板的表面及内部形态分析[J]. 中国口腔颌面外科杂志, 2019, 17(3): 210-215.
[5]	卢陈佩, 李洪亮, 欧阳宁鹃, 林雨恒, 司家文, 沈国芳. MicroRNA-103-3p对小鼠前成骨细胞MC3T3-E1成骨分化早期的影响[J]. 中国口腔颌面外科杂志, 2018, 16(4): 302-309.
[6]	魏弘朴, 余婧爽, 姜腾飞, 李祥, 王旭东. 三维打印钛合金颅颌面接骨板的生物力学性能分析[J]. 中国口腔颌面外科杂志, 2017, 15(6): 503-507.
[7]	张广德，靳霞，李荣亮，杨世茂，郭延伟，房殿吉. BMP-9/EPO双基因共转染ADSCs复合nHAC/PLA支架修复兔下颌骨缺损的实验研究[J]. 中国口腔颌面外科杂志, 2017, 15(3): 202-208.
[8]	周宇宁, 马吴迪, 桂志鹏, 夏伦果, 徐袁瑾. 糖尿病兔骨髓间充质干细胞成骨分化能力探讨[J]. 中国口腔颌面外科杂志, 2017, 15(2): 103-108.
[9]	王晓玲, 孙蕙珺, 朱妍菲, 唐艳梅, 薛晓晨, 聂萍, 朱敏. 鼻阻塞对幼年大鼠髁突骨髓间充质干细胞成软骨分化的作用[J]. 中国口腔颌面外科杂志, 2017, 15(1): 1-5.
[10]	盛夏涵, 曲禄瑶, 蔡协艺. 大鼠骨髓间充质干细胞与髁突软骨细胞共培养诱导软骨化分化的实验研究[J]. 中国口腔颌面外科杂志, 2016, 14(6): 490-494.
[11]	李彪, 姜腾飞, 沈舜尧, 蔡鸣, 姜闻博, 沈国芳, 王旭东. 3D打印个体化钛板在正颌手术中的应用及其准确性评价[J]. 中国口腔颌面外科杂志, 2016, 14(5): 419-424.
[12]	王敏娇，司家文，张剑飞，王旭东，沈国芳* ，于洪波*. 数字化模型外科在牙颌面畸形治疗中的应用[J]. 中国口腔颌面外科杂志, 2015, 13(6): 497-501.
[13]	姜喜亮, 朱晓文, 胡静, 宋健, 叶斌. 整合素信号通路在大鼠骨髓间充质干细胞牵张中的作用和转导机制[J]. 中国口腔颌面外科杂志, 2015, 13(3): 193-199.